YONICO Chamfer Router Bits Edge Forming 45 Degree 1/2-Inch Shank 13917

• This bit will cut 45° bevels and chamfers at 1" deep and high. This bit will also create a 90° angle miter joint. Can be used with stock up to 1" thick. Two flute carbide cutters and 1/2" Shank.
• Add a beveled edge to surface edges or create accurate miter joints
• Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
• For use on table mount and handheld router (Up to 2-1/2" diameter)
• Silver induction brazing for maximum strength and durability

This bit will cut 45° bevels and chamfers at 1 deep and high. This bit will also create a 90° angle miter joint. Can be used with stock up to 1 thick. Two flute carbide cutters and 1/2 Shank. Highlights: - Add a beveled edge to surface edges or create accurate miter joints - Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge - For use on table mount and handheld router (Up to 2-1/2 diameter) - Silver induction brazing for maximum strength and durability - Manufactured with anti-kickback design to help prevent workshop mishaps Item Includes: 1 Router Bit While chamfer bits are mostly used for edging, these bits can also be used to create miter joints of various angles. Some of the available angle degrees are 11.25°, 15°, 22.5°, 30° & 45°. Cutting these angles into 2 adjoining pieces of wood will create miter joints of 22.5°, 30°, 45°, 60° & 90° degrees respectively.