Thread Lock Medium and High Strength Lock, 10ml x 2 locktight threadlock, Threadlocker Fasteners and Screws from Loosening Due to Prolonged Vibration, Stable and Anti-Rust

• Lock Tight Thread Lock: Thread lock has strong adhesion, impact resistance, and vibration resistance, preventing nuts, bolts, and screws from loosening, rusting, and corroding due to long-term vibration, and plays the role of locking and sealing the screws and nuts
• Medium & High Strength Threadlocker: Medium strength thread lock blue is used for locking and sealing threads below M20, allowing removal with tools when necessary. High-strength locktight red, for permanent locking and sealing of threads below M36
• Sealing & Rust Prevention: Lock tight provides a tight lock and seal, effectively preventing leaks, rust, and corrosion. Easily repairable without stocking up on expensive locking nuts and washers, avoid costly and potentially harmful problems caused by loose nuts
• Easy To Use: Just clean all surfaces, apply thread lock compound to the screw ends, turn the nut to the locking compound position, and wait. The locktight initial cure time is 10 minutes, fully cured within 24 hours. Note: Thread Lock comes in a half bottle, but the capacity is correct. Since it is an anaerobic glue, there needs to be air in the bottle to maintain the liquid state
• Widely Used: Locktight threadlock has high resistance to impact, vibration, high temperature, and oil. Suitable for all threaded metal connections, such as metal fasteners in automotive electronics, home appliances, kitchen and bathroom appliances, and furniture

1Locktight Threadlock The lock tight thread lock has strong adhesion and can fix screws and nuts. The lock tight ensures the close sealing of screws and nuts, avoids loosening due to vibration, prevents screws from rusting and leaking, and prolongs the service life of screws. Why isn't the bottle full? The thread lock are anaerobic, while anaerobic sealants are one-component adhesives that remain liquid when exposed to air and require air to remain liquid and prevent setting and hardening. Package Contents You will receive: 1 x 10ml medium strength threadlocker (for locking and sealing threads below M20) 1 x 10ml high-strength threadlocker (for permanent locking and sealing threads below M36) How To Use 1. Clean the surface and avoid mixing metal, oil, and other debris 2. Apply a sufficient amount of thread locker to the end of the screw 3. Tighten the nut to the locker position by adjusting the angle within 3 minutes. No further adjustment is required after curing 4. Wait for curing. The initial curing time is 10 minutes and the full curing time is 24 hours