Wengart Underfloor Heating Actuator WG2208,AC230V M30*1.5 On/Off Status Visible,Use with Thermostat to Save Energy Effectively

• The electrothermal actuator adopts a thrust of 110N, a stroke of 3mm, and an opening time of 3-5 minutes. If there are special requirements, the stroke and thrust can be customized
• The electrothermal actuator adopts the standard M30x1.5mm threaded interface, only 2 wires are needed, the installation is simple and quick, and the disassembly is convenient, suitable for all M30x1.5mm valve bodies
• Thermoelectric actuators rely on thermal expansion and contraction, no mechanical transmission, no component wear, paraffin propulsion elements, PTC heating drive, stable operation, low noise, maintenance-free, low power consumption, long service life
• Thermoelectric actuator is suitable for floor heating, used in conjunction with a thermostat, can open or close the valve according to the signal of the thermostat, saving your energy
• This electrothermal actuator can directly indicate the opening and closing status, which is convenient for knowing the current valve status.
• The thermoelectric actuator has a spring return function, which can return to the original state after power failure.
• The electrothermal actuator can be used as an accessory of the floor heating water separator for heating or cooling systems, suitable for homes, hotels, etc.
• The electric heating executive is made of high-quality fiberglass material, heat-resistant and durable, high-quality products give you a good user experience.

The electric heating actuator is a device used to control the heat output in the heating system. It is commonly used in central heating systems in homes or commercial buildings, especially floor heating systems. Its main function is to adjust the flow of hot water or steam according to the signal from the thermostat, thereby controlling the indoor temperature. When the thermostat detects that the indoor temperature is lower than the set value, it sends a power-on signal to the electric heating actuator. The electric heating element begins to heat up, and the heat is transferred to the valve through the heat conduction component, causing the valve to open and allow hot water or steam to flow into the radiator or floor heating pipeline. When the indoor temperature reaches the set value, the thermostat stops sending signals, the electric heating element stops heating, and the valve closes under the action of the spring, stopping the flow of hot water or steam. The advantages of the electric heating actuator include fast response speed, high control accuracy, and easy installation. It can accurately control the heating system according to actual needs, improve energy utilization efficiency, and ensure the comfort and stability of indoor temperature. Specification: Ambient Temperature:-5-50℃ Thrust:110N 2 x0.5 mm² Wire Normally Closed M30 Thread:M30x1.5mm Stroke Lenght:3-4mm Voltage: AC24V Stable Power Comsuption: 3W Full Time:180-300s Cable Length：900mm Protection Class:IP41