Flat-Pro® Twist-it – 250 Screw Clips for 3mm Joint – Tile Levelling System for 3–20 mm Tile Thickness

• ✅ Achieve a perfectly level tile surface – Ensures consistent spacing and a flush finish with no lippage. Suitable for both DIY enthusiasts and professional tilers.
• 📦 250 Screw Clips Included for 3mm Joints – Sufficient for projects up to 27.5 m² (size 900x600 mm). Consult the coverage chart to determine the exact number needed for your tile/slab size.
• 🏡 Use Extra Clips for 20 mm Slabs – When laying 20 mm outdoor tiles or slabs, make sure to use enough clips, especially at the corners. This prevents premature breakage when tightening the twisters.
• ✔️ Suitable for 3–20 mm Tile Thickness – Compatible with a wide range of tile types, including outdoor porcelain slabs.
• 🛠️ Easy to use – no tools required. Screw the twister caps (not included!) onto the clips by hand to align tile edges. After 12–24 hours, remove by tapping along the grout line with a rubber mallet or safety shoe.
• ❗NOT compatible with caps or twisters from other brands.
• ⚠️ Not for Polished or Hand-Cut Tiles – Not suitable for polished tiles (they can get scratched) or hand-cut natural stone, which usually needs wide joints of 10 mm or more.

Get started like a true professional: eliminate tile lippage and achieve a smooth, even result with Flat-Pro Leveling's starter kit. This kit contains a revolutionary new leveling system that eliminates the need for pliers. Instead of the traditional clips, you use screw clips on which you spin a twister to achieve a level surface across the joint. The result is as good as with the traditional system using a wedge, with the extra advantage that you can work much faster. On the lookout for a high-quality levelling system? Then you have come to the right place! Flat-Pro Leveling's clips and twisters excel in reliability: you spin the twister on the screw clip, tighten it and remove them just as quickly by kicking them off with a shoe or a rubber hammer. In brief: ▶ Contents: 250 screw clips ▶ Suitable for tiles between 3 and 20 mm thick - so also for outdoor porcelain! ▶ With a desired joint width of 3 mm ▶ For a floor area of 27.5 m² in size 900x600 - consult the calculation table for any other format Important tip for smooth use: wait until the next day to remove the clips BUT never wait longer than 24h after installation! Otherwise, you run the risk of the clip not coming off completely due to the cured adhesive. Attention: we recommend that you always use our screw clips in combination with our twisters. These can be found in the Twist-it Starter Kit.