TOPWAY Tile Levelling System 50pcs Pack Reusable Tile Levellers Spacers for Building Walls Floors + Special Wrench 347833

• 【Application and Use】Designed to be used as a leveler, 1.5mm cross spacer and standard 1.5mm, 2mm, 2.5mm and 3mm spacer
• 【High Quality & Durable】 Made of semi-crystalline thermoplastic with high impact resistance, and the steel part is made of stainless steel with a thickness of 1.4 mm, which allows you to use them with plastic spacers from 1.5 mm to 2.5 mm
• 【Reusable & Durable】Save a lot of money by using them again and again; After the tiles are set, just twist the screws counterclockwise and remove the main anchor, you may need to hammer it gently
• 【SIMPLE AND EASY TO USE】Unlike ordinary wedges and levelling pliers, this new system does not require any tools unless you need to tighten very hard and the special wrench is included. It is quite easy to repair or remove with the key to improve the tile installation speed
• 【Suitability】 Suitable for tiles from 3mm to 16mm thick, but can be used with tiles up to 18mm thick

Specifications: Material: PP + Stainless steel Color: Black + Orange Suitable spacer: 2approximately 6 mm Suitable for tile thickness: 3approximately 16 mm Quantity: approximately 50 pcs Package Includes: 50 x Tile positioning levelers (Approx.) 1 x Wrench Instructions: 1. When laying and pasting tiles, the brick seam shall be kept at 2-6 mm 2. Set the thickness of the tile that the regulator will be inserted into, insert T-type metal needles along the brick joints, then rotate 180° to lock it in the bottom of the two bricks 3. Squeeze the adjusting cover downward by hand or with the special wrench to make the level of the two bricks consistent 4. After the construction, five hours later, when cement or tile adhesive is not completely dry, you can loosen adjusting cap to the opposite direction, 180° rotate again, let the T needle along the crack out 5. Before tightening, it is recommended to rotate the T-pin left and right several times to make room for the surrounding cement or tile glue so that the regulator can be more easily removed