433Mhz Universal Replacement Cloning Electric Gate Garage Door Remote Control with Key Fob (Pack of 2)

• Four buttons can copy four different types of chips respectively. It is a remote control that can operate four different types of facilities, helping you save a lot of money.
• With the use of radio frequency technology, there is no directional limitation and the high-sensitivity transmission prevents signal jamming.
• The transmission distance is between 50-100m (open space) at the frequency of 433MHz, providing you with a new remote control experience that brings significant convenience to your daily life.
• This product boasts high copy accuracy and efficiency, while also being easy to install and use.
• It is suitable for the control of various devices including 4-channel radio control machines for cars, car roofs, garage doors, gate doors, alarm systems, heating systems, home automation, and more.

Specifications: Working voltage: DC6V Working current: ≤10mA Working frequency: 433.92MHz and other frequencies are optional Transmitting power: ≥10mW Frequency deviation: ± 0.2MHz Transmission rate: 50--60KHZ Instructions: In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, while such remote control has not be developed. You may configure your remote control within 2 seconds if you meet the following three conditions: Condition I: the original remote control may be used normally. Condition II: know the transmission frequency of original remote control. Condition III: IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code. Copying method: 1. Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off. 2. Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys. Tips: if you reset the code of remote control and want to recover, press two keys until LED light flicks. Technical parameters: 1. IC model of original remote control is 2262 2260 1527 2240 and compatible IC. 2. It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code. 3. The inapplicable IC is HCS300 30 and compatible rolling code IC. 4. The battery