SPAX T-Star Plus 191010802405 Wood Screw 8.0 x 240 mm Countersunk Head Partial Thread 4Cut Wirox A3J Pack of 50

• Use: for connecting wooden elements. Spax-exclusive Wirox surface
• As a multi head pronounced countersunk for flush penetration and comfortable processing, milled in wood, brakes on metal. Optimum power transmission and clean fit with Spax bit T-Star plus T40
• Effortless work; and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the gap effect by 4CUT: Four edges in the screw tip.
• Made in Germany - approved for use in the building inspection: European Technical Approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114)

Spax - safety, quality and reliability since 1967. The branded product in the characteristic green packaging – produced at home in Germany and exported all over the world: clever heads in Ennepetal constantly develop new ideas, expand the product range and establish the highest quality for DIY enthusiasts, professional processors, planners and architects around the world. - Use: For connecting wooden elements indoors and outdoors without direct weathering. Spax-exclusive Wirox surface: higher corrosion protection compared to conventional bare zinc plating than required by standard, as a multi-head pronounced countersunk head for flush penetration and comfortable processing, milled in wood, brakes on metal. Optimal power transmission and clean fit even when working overhead with Spax bit T-Star plus T40 with guide pins. Effortless work and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the gap effect by 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile. Made in Germany. Approved for use in the technical approval for screws as a wood connecting medium in supporting wood constructions (ETA-12/0114). Box contents: 1 Spax box, 50 pieces wood screw, T-Star plus, countersunk head, partial thread, 4CUT, WIROX surface, thread diameter (Ød1) = 8 mm x total length (Ls) = 240 mm, partial thread length. (LGT)== 80 mm, head diameter (Ødk): 15.1 mm, bit not included