Forza – Mechanical Sheet Drill with Bearing 42mm

• Standard punches can cut up to 2 mm in steel sheets and 1.5 mm in stainless steel sheets.
• The screws of the 55 series punches are very high strength 140 kg/mm2.
• Thanks to the bearing they include the puncher performance is increased by 200%.
• This means that it requires half the strength.
• For this reason, they are recommended for large diameter holes.

Description Standard holes can cut up to 2 mm in steel and 1.5 mm on stainless steel sheets. *This recommendation is general, there is a wide range of steels and stainless steel. It is recommended to oil the sheet before cutting (e.g. use Protoolube). If in doubt, it is recommended to use the 56 series. The screws of the perforators of the 55 series are very high strength of 140 kg/mm². Thanks to the bearing that includes the drilling capacity, increases by 200%. This means that it requires half the force. For this reason, they are recommended for large diameter holes. Diameter = 42 Pg = Screw = M14