Drain valve for kitchen sink, 1 set, size Ø 62.5 mm - 1 1/4 inch, SS201 stainless steel valve top, M6x60 mounting screw, PP base with brass nut, PVC seal and 41 mm stopper, stopper valve

• ✅ [drain valve complete set - suitable for 1 1/4 inch drains] the drain valve set consists of a rubber plug with chain, stainless steel valve top, m6x60 mounting screw, valve seal and pp base with brass internal thread.
• ✅ [drain set with easy replacement and installation] suitable tools such as screwdrivers and, if necessary, pipe wrenches are required for the drain set repair - installation tools are not included in the scope of delivery.
• ✅ [drain set components made of corrosion-resistant materials] the components of the kit are made of pvc, pp, brass and stainless steel.
• ✅ [drain set only suitable for 1 1/4" inch siphons] the drain set has a 1 1/4 inch thread and can therefore only be connected to drain pipes of the same size.
• ✅ [scope of delivery] Stopper valve set with 1 x ∅ 41 mm stopper, 1 x 30 cm stopper chain, 1 x M6 x 60 screw, 1 x ∅ 62.5 mm valve top, 1 x bottom connection piece with ∅ 1 1/4 inch, 1 x seal.

Your drain valve is leaking and smells unpleasant? Then it's time to replace the drain set. Here you have found the right complete drain set for 1 1/4" inch systems. Drain valve for sinks, 1 set, size Ø 62.5 mm - 1 1/4 inch, SS201 stainless steel valve top, M6x60 mounting screw, PP base with brass nut, PVC seal and 41 mm stopper, plug valve Whether for washbasins, sinks, bathtubs or shower trays - drain sets in the sizes 1 1/2" inch and 1 1/4" inch are used everywhere. To choose the right drain set size, the drain pipe of the trap must be measured as well as the drain diameter on the top of the sink. For installation, the old drain valve must first be completely dismantled and the pipe connection and sink outlet thoroughly cleaned. The stainless steel upper part of the valve is then inserted into the top of the sink and the mounting screw is inserted through the opening in the centre. The PP substructure including the seal is then fitted to the sink from below and screwed tight from above with the mounting screw. Finally, connect the substructure to the siphon drain and check whether the drain system is watertight. Size differences between the valve top and connection piece at the bottom: - Size 1 for 1 1/4" inch pipe connection pieces (substructure) and ∅ 62.5 mm sink valve top cut-out - Size 2 for 1 1/2" inch pipe connection pieces (substructure) and ∅ 70 mm sink valve top cut-out The following is included in the scope of delivery: - Stopper valve set with 1 x ∅ 41 mm stopper, 1 x 30 cm stopper chain, 1 x M6 x 60 screw, 1 x ∅ 62.5 mm valve top, 1 x bottom connection piece with ∅ 1 1/4 inch, 1 x seal