WAN2TLK 2Pack 50ml Locktight Threadlock Blue and Red, Thread Lock Medium and High Strength Lock Tight for Nuts, Bolts, Fasteners and Metals, Prevent Loosening and Corrosion

• Keep Fasteners Secure and Tight: The thread lock agent has strong adhesion, thread locker can fix screws and nuts, lock tight ensures close contact and sealing of screws and nuts, avoid loosening caused by vibration, and prevent screws from rusting and leaking.
• Value 2 Pack Threadlocker: 2 x 50ml bottles of thread locker, lock tite are easy to store and can be used for a long time without drying out or leaking. Medium strength thread lock blue and high strength red threadlocker, providing a wide range of options for your various needs.
• Widely Uses: Lock tight thread lock family must-have to Etend the Life of Items and Safe Using! Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, our threadlock can be used in various automotive, industrial, and furniture applications.
• Easy to Use: Simply apply the threadlocker evenly to the thread, tighten the nut, and cure initially for 20 minutes, then your Items can be used normally after fully cured in 24 hours. Note: Pipe threads above Dn65 must be coated with adhesive on both sides, otherwise joint leakage may occur. locktight threadlock do not mix with metal, oil and dirt.
• Half-Bottle Package: Threadlocker will solidify in anaerobic conditions, so the bottle is half-full to ensure the thread locker remains liquid, prevent solidification and hardening. Please believe in the power of WAN2TLK brand, We strive to provide the best quality products and the best customer experience.

Locktight Threadlock: WAN2TLK lock tight thread lock, also known as screw fasteners or anaerobic adhesive, provides a strong and consistent lock that keeps everything firmly in place. No more worrying about tangled threads and unstable nuts or bolts. Thread locker medium strength is suitable for bolts below M20, Thread locker high strength is suitable for bolts below M36, meeting the needs of most bolts in daily life, and has a heat resistance of 150℃, enhancing its widespread and reliable application. WHY IS THE BOTTLE NOT FULL? Threadlockers are anaerobic, and anaerobic sealants are single-component adhesives that remain liquid when exposed to air, requiring air to remain liquid and prevent solidification and hardening. Use Steps: 1.Keep the surface clean 2.Apply a sufficient amount of threadlocker agent at the end of the screw 3.After applying the thread lock blue agent, tighten the nut to the locking agent position in 3 minutes by adjusting the angle, no further adjustments after curing 4.Wait for 20 minutes for the initial curing, and 24 hours after the complete curing, which prevents loosening and rust and corrosion Attention: 1. Do not mix with metal, oil and dirt 2. Pipe threads above Dn65 must be coated with adhesive on both sides, otherwise joint leakage may occur Do not pour the unused glue back to avoid contamination;