Tedsen SKX1GS / SKX2GS / SKX4GS / SKJ Mini Compatible Handheld Transmitter, Clone Remote Control, 4-Channel 433.92 MHz Fixed Code Fob Copier

• Affordable, high quality Tedsen SKX1GS / SKX2GS / SKX4GS / SKJ MINI fixed code compatible clone remote
• Distance: Extra long range of up to 100 metres
• Fast cloning process within 10 seconds
• Programming instructions, video link, battery and key ring are included
• Even better quality than the original Tedsen remote control

This is a high quality clone remote control that will clone your Tedsen SKX1GS / SKX2GS / SKX4GS / SKJ MINI 433.92MHz fixed code remote controls. With this remote control clone you can clone all 433.92MHz fixed code key fobs. Follow these simple steps to program your remote control. You need to erase the remote first: 1) Press and hold buttons 1 and 2 at the same time - the LED flashes 3 times. 2) Press and hold the button 1 and release the button 2 3 times, the LED will flash continuously (this means that the remote is cleared). Next, you need to clone your original remote: 1) Place both remote controls (ORIGINAL and CLONE) in the "back to back (II)" or "side by side" position. Make sure they have direct contact and touch. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Press and hold the button until the LED lights up: 2 flashes - 3 times - continuous light = successful cloning only when the light is on permanently. If for any reason the clone flashes no further than 2, this means that the signal does not pass through, please slide the remote slowly up and down until you reach the point where it will go through. Programming videos: https://www.youtube.com/watch?v=cysYPSMgPXY or https://www.youtube.com/watch?v=oX4FNLXNXpQ If you want to increase the range of the remote control reception to 150-200 meters, you can connect this antenna: https://www.amazon.de/dp/B0BWFH3TGT If you need car sun visor clip holder for remote controls, you can buy it here: https://www.amazon.de/dp/B07FVW7F59