Tedeligo 433Mhz RF Wireless Remote Control Switch with 2 Transmitters DC 7V 12V 24V 36V 48V AC12V 24V 36V 10A 2Ch Relay Receiver for light, gate motor, garage door system

• ◤Five control modes◥: According to different usage scenarios, the control mode (momentary mode (monostable), lighting Toggle mode (bistable), Latched mode, Mixing mode, motor Toggle mode) can be freely and easily configured, making it very easy to set and re-set the control mode. The product has been tested and setted control mode( Toggle mode) before leaving the factory.
• ◤Quality assurance & Strong voltage compatibility◥: High-quality relays can be used more than 100,000 times, the applicable voltage is DC 7V 12V 24V 36V 48V, AC12V 24V 36V, USB 5V. and the maximum current can support 10A. So it can work normally even under unstable voltage conditions.
• ◤Flexible use◥: This wireless receiver is a clean relay design principle, containing a total of 2 relays, each relay has 3 terminals (normally open, common, normally closed), and these 2 relays are independent, you can remotely control them Independent by pressing the button on the remote control. One wireless receiver can be compatible with 15 wireless remote controls at the same time.
• ◤Powerful wireless control performance◥: The wireless controller set can be controlled without obstacles within a distance of 50 meters (strong signals can pass through walls, floors, doors). The wireless remote control switch has stable power, high receiving sensitivity (>97dbm), and stable and reliable performance.
• ◤Wide application◥: You can use this wireless control kit to control the following devices: such as rolling doors, electric doors, garage doors, electric curtains, telescopic doors, fans, lamps, ventilation devices, etc. Due to the wide application of the product, if you encounter any problems during use, please contact us, we are responsible for the products we sell. Thank you.

"Technical Data Wireless receiver: Main board type: Dry(Clean) relay type Input Vlots: DC7V~48V(or AC 12-36V or USB 5V) Output Vlots: 1V~250V Max Current: 10A Standby Current: <5MA RF Frequency: 433M Receive sensitivity: >97dbm Remote storage: 20 pcs Support remote type: 1527 Learning code Working mode: Momentary mode, Toggle mode, Latching mode,Mix mode,Toggle mode(only for motor). Pin: L,N, NO , NC , COM Wireless Remote control: Transmitting range : Open space is more than 1000 meters RF frequency : 433MHz Support encoding : 1527 Leaning code Waterproof grade: IP44 Battery : 2pcs *CR2016 ( include battery ) Five control modes can be switched at will: Momentary Mode: Performance: 1. Press and hold on button """"""A"""", relay """"""1"""""" will turn on; Release the button """"A"""", this relay """"""1"""" will turn off. 1. Press and hold on button """"B"""", relay """"2"""" will turn on; Release the button """"B"""", this relay """"2"""" will turn off. How to program 1. Press the learning button (on the receiver) 1 times. The indicator LED on the receiver will light up; 2. Press button """"A"""" on the remote transmitter. The indicator LED on the receiver will flashing several times and then light up; 3. Press button """"B"""" on the remote transmitter. Succeed. Toggle Mode(for Equipment other than motors ): Performance: 1. Press button """"A"""", relay """"1"""" will turn on; Press button """"A"""" again, this relay """"1"""" will turn off. 1. Press button """"B"""", relay """"2"""" will turn on; Press button """"B"""" again, this relay """"2"""" will turn off. How to program 1. Press the learning button (on the receiver) 2 times. The indicator LED on the receiver will light up; 2. Press button """"A"""" on the remote transmitter. The indicator LED on the receiver will flashing several times and then light up; 3. Press button """"B"""" on the remote transmitter. Succeed. Latched mode (for 3-button remote controls ): Performance: 1. Press button """"A"""", relay """"1"""" will turn on; 2. Press button """"B"""", relay """"2"""" will turn on, at the same time relay """"1"""" will turn off. 2. Press button """"C"""", relay """"1"""" and relay """"2"""" will turn off. How to program 1. Press the learning button (on the receiver) 3 times. The indicator LED on the receiver will light up; 2. Press button """"A"""" on the remote transmitter. The indicator LED on the receiver will flashing several. times and then light up; 3. Press button """"B"""" on the remote transmitter. Succeed. Mix mode: Performance: 1. Press and hold on button """"A"""", relay """"1"""" will turn on; Release the button """"A"""", this relay """"1"""" will turn off. 2. Press button """"B"""", relay """"2"""" will turn on; Press button """"B"""" again, this relay """"2"""" will turn off. How to program: 1. Press the learning button (on the receiver) 4 times. The indicator LED on the receiver will light up; 2. Press button """"A"""" on the remote transmitter. The indicator LED on the receiver will flashing several times and then light up; 3. Press button """"B""""on the remote transmitter. Succeed. Motors toggle Mode(Only for motors ): Performance: 1. Press button """"A"""", relay """"1""""will turn on; 2. Press button """"B"""""""""""""""", relay """"2"""" will turn on, at the same time relay """"1"""" will turn off. 2. Press button """"B"""" again, relay """"2"""" will turn off. How to program 1. Press the learning button (on the receiver) 5 times. The indicator LED on the receiver will light up; 2. Press button """"A"""" on the remote transmitter. The indicator LED on the receiver will flashing several times and then light up; 3. Press button """"B"""" on the remote transmitter. Succeed. How to delete the control signal: Press the learning button (on the receiver) 8 times. Succeed."