TECNOIOT 2pcs MH-Tiny ATTINY88 Micro Development Board 16MHz Digispark NANO V3.0 Upgraded

• 【MH-Tiny ATTINY88】 The microcontroller development board based on MH-ET LIVE Tiny88 (16.0 Mhz) similar to the Arduino line, only cheaper, smaller and slightly less powerful.
• 【Compatible】With the ability to use the familiar Arduino IDE, the MH-ET LIVE Tiny88 (16.0 MHz) is a great card for launching into electronics, or perfect when another card is too big or too big. The MH-ET LIVE Minuscule88 (16.0Mhz) is shipped fully assembled except the included headers and easy to solder by yourself. Supports Arduino IDE 1.0+ (OSX/Win/Linux)
• 【Features-1】1. Power supply via USB or external source - 5V or 7-35V (12V or less recommended, automatic selection) Built-in 500ma 5V controller. Built-in USB/4. 26 I/O pins (2 are used for USB only if your program actively communicates via USB, otherwise you can use all 6 even if you program via USB)
• 【Features-2】5. 8k flash memory (approx. 6k after bootloader) 6. I2C and SPI67 26-PWM (26 pin with PWM software, only two (D9, D10) with PWM hardware) ADC On 8 Pin Adhesive, 9. Power LED & Test/Status LED. Size (mm): 44.5 x 18.3 x 3
• 【Package Contains】☆☆☆2 x MH-Tiny ATTINY88 Micro Development Board 16 MHz☆☆☆

x2pcs MH-Tiny ATTINY88 micro development board 16Mhz /Digispark ATTINY85 Upgraded /NANO V3.0 ATmega328 Extended The MH-ET LIVE Tiny88(16.0Mhz) based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With the ability to use the familiar Arduino IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much.The MH-ET LIVE Tiny88(16.0Mhz) is shipped fully assembled except for the headersincluded and easy to solder them by yourself. Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Features: 1. Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection) 2. On-board 500ma 5V Regulator 3. Built-in USB 4. 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 5. 8k Flash Memory (about 6k after bootloader) 6. I2C and SPI 7. 26-pin with hardware PWM) 8. ADC on 8 pins 9. Power LED and Test/Status LED 10. Size(mm):44.5x18.3x3 Packet Contains: 2pcs x MH-Tiny ATTINY88 Micro Development Board 16MHz