Suzuki Chromatic Valve set for SCX, Model: CHV-01

• Replacement valve for Suzuki Chromatic Models, SCX-48, SCX-56 and SCX-64.
• The valve is an important part related to the performance of harmonica that opens and closes to control the air flow in the chromatic harmonica.
• For example, the valve may have the problem while using harmonica, such as the valve is stick to the reed plate due to the adhesion of water vapor and saliva, and deterioration over time.
• When harmonica is maintained by yourself, the valve was bent and it couldn't be closed as if it were floating from the reed plate and it causes noise …

Replacement valve set CHV-01 for Suzuki Chromatic Harmonica SCX series This is a replacement valve set that you can use when you replace the valve of the chromatic harmonica (SCX series) by yourself. This can be used on SCX series, SCX-48, SCX-56 and SCX-64. The valve is an important part related to the performance of chromatic harmonica, that opens and closes to control the air flow in the chromatic harmonica. The problem on valve may be cuased over time. For example, the valve becomes more likely to stick to the read plate due to the adhesion of water vapor and saliva, and deterioration over time. It can be stressful when playing, or the valve can be bent during maintenance. It may not close as if it were floating from the reed plate, causing noise ... In such a case, replace the valve. How to replace the valve will be explained here. First, remove the valve that you want to replace, which is attached with adhesive. At this time the adhesive that was pasted remains on the reed plate, so be sure to peel it off cleanly. *The remaining adhesive can be easily removed by using the tip of a cutter or a minus screwdriver. Be careful not to let the adhesive dust get inside the harmonica when it is peeled off. Next, pay attention to the front and back of the new valve and attach it with adhesive. The valve has a glossy front surface, while the back surface to which the adhesive is applied is to prevent it from sticking to the reed plate comes with powder. Please use it as a guide for distinguishing the front and back. Apply adhesive to the width of the valve so that it is square, and then attach it evenly to the edge of the window of the reed plate. Adhesive is easy to apply if you use a toothpick to apply a small amount. (Adhesive: Cemedine SUPER X is recommended.) After pasting adhesive, leave it for about 1 hour with the cover removed, and the adhesive will harden, so you can rest assured. SCX series replacement valve set CHV-01 Corresponding models: SCX series (SCX-48, SCX-56, SCX-64)