Stainless Steel Ball Lock Disconnect with Flow Control for Cornelius Kegs

• this is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily.
• This stainless steel ball lock disconnect is machined from stainless steel and has an MFL thread.
• If you have a beer of a specific carbonation level you will be required to dispense that beer (if using CO2 to dispense) at a very specific pressure. So you do not have the ability to increase or decrease pressure to change the flow speed out of the tap.
• For this reason you need to either adjust the beer line length, internal diameter or use flow control devices like this to ensure your beer comes out the tap at the right speed. Ideally between 250-400ml/10 seconds (based on a 10mm ID spout).
• Flow control devices are good but they inherently can create a small amount of turbulence and therefore can cause foaming. In the past flow control taps have been the only common option.

Flow Control Ball Lock Keg Connector - this is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily. This stainless steel ball lock disconnect is machined from stainless steel and has an MFL thread. If you have a beer of a specific carbonation level you will be required to dispense that beer (if using CO2 to dispense) at a very specific pressure. So you do not have the ability to increase or decrease pressure to change the flow speed out of the tap. For this reason you need to either adjust the beer line length, internal diameter or use flow control devices like this to ensure your beer comes out the tap at the right speed. Ideally between 250-400ml/10 seconds (based on a 10mm ID spout). Flow control devices are good but they inherently can create a small amount of turbulence and therefore can cause foaming. In the past flow control taps have been the only common option. Flow control taps like these ones are popular however they have the issue that due to the fact they are placed right at the end of the beer line they have no head pressure. As a result any turbulence created can cause foaming and carbonation to come out of solution. Flow control ball lock disconnects like these on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. Even in the instance that high turbulence is created the beer will be far more resistant to foaming issues. For this reason flow control ball lock disconnects like these have significantly better performance allowing you the flexibility to adjust line resistance easily but without the introduction of turbulence that creates foaming. Disassembly is not normally required for cleaning. Cleaning can be done simply by washing PBW or similar through the unit