SQUADO Set of 10 Universal Remote Control Automatic Gate Duplicator Wireless Remote Universal 433MHz

• Extremely small size. It has the ability to store up to 4 different remote codes Compatible frequency: 433.92 fixed code.Codes copiable: up to 4 codes.It is not compatible with Rolling code remote controls.Remote control batteries are not included (27 to 12 v).This product is supplied without instructions.
• The remote control is easily programmed, first of all you need to erase all the data while holding down the keys a and b for about 20 seconds, until the LED flashes change, after which press the button from the source remote you want to copy and close it to the clonable remote control close to shoulder the different LED signal will indicate the programming happened
• To start saving frequencies, place the remote control in front of the remote control to be duplicated about half a centimeter away from each other. Simultaneously press the button to be duplicated on the original remote control and the button to be programmed on the purchased remote control, the LED will start flashing constantly, after about 3 seconds release the keys. Repeat the same steps to program the other buttons on the remote control.
• ABS and aluminium remote control with a beautiful and modern design, sliding key cover, 4 buttons for controlling up to 4 gates, anti-theft, alarms, doors, roller blinds, swing blinds.
• To clear the already saved settings, press the A and B buttons on the remote control at the same time until the LED starts to flash constantly, then release the keys.

One remote control that controls up to 4 different codes is self-programmable and compatible with most remote controls (such as Faac, Came, Nice etc) with 433.92 MHz frequency and fixed code. Extremely small in size, it is built in sturdy abs and aluminum, has a neat and modern design, and the sliding key cover prevents accidental pressures and is supplied without battery (27 to 12 v) which is replaceable without causing the loss of stored codes. This product comes without instructions, but it is very easy to program it, just place the remote control in front of the one to be duplicated about half a centimeter away. Simultaneously press the button to be duplicated on the original remote control and the button to be programmed on the purchased remote control (A or B) the LED will start flashing constantly, after about 3 seconds release the keys. Repeat the same steps to program the other buttons on the remote control. To erase the existing memory, just press the A and B keys of the remote control at the same time until the LED starts to flash constantly, then release the keys to clear the memory of both memory.