Soft Start Module, 230 Volts, 16 A, incl. Soft Start Installation Set

• Soft start for electric tools with brush motor from 220–250 volts, max. 16 A
• Includes extensive accessories such as cable extensions and plugs/ terminals
• Suitable for angle grinders, table saws, hand circular saws, routers, chop saws and mitre saws
• Limiting the starting current (starting current limiter), protects the bearings
• Compatible with machines from leading manufacturers

Soft start module for electric tools with brush motor with a maximum of 3500 watts. The module causes a delayed, slower start of the machine, thus reducing the current load when switched on. Furthermore, the gears and the bearings are protected. As the soft start delays the current flow when switched on, it is therefore imperative that the module is not under voltage until the switch of the machine has been actuated. Installation in front of the switch therefore has no effect. Compatible with machines from leading manufacturers such as Bosch, Makita, Scheppach, Dewalt, Einhell, Holzmann, Hitachi. The set includes various plugs and practical cable extensions, which are necessary to connect the module into the machine. The red flat plug-in connectors may only be installed in small machines up to 2200 watts. For all more powerful machines, the Wago clamps or solder connectors are required. Box contents: 1 x soft start 16 A. 2 x clamps 221–412. 1 x clamp 221–413. 3 x solder connectors, red. 6 x flat plug-in connectors, insulated, red (3 male, 3 female) can only be used for machines up to 2200 watts. 3 x cable extensions, each 13 cm (red, blue, black), Lapp wire H05V-K 300/500 V.