SEA Compatible Wireless Receiver 2-Channel Receiver for Head 433 / Coccinella Roll / 433 Smart Remote Controls 12-24 VAC/DC, NO/NC 433.92MHz Rolling/Fixed Code

• Can be programmed with: SEA Head 433 / Coccinella Roll / 433 SMART remote controls
• Universal 2-channel 12-24V AC/DC receiver
• Frequency: 433.92 MHz fixed / rolling code
• Range: up to 100 - 200 metres with additional antenna
• Memory for up to 400 remote controls

This universal 433.92 MHz rolling / fixed code 2-channel receiver is compatible with SEA Head 433 / Coccinella Roll / 433 SMART 433.92MHz remote controls. With the 2 channels, you can operate 2 different garage doors and/or other electronic devices with your original SEA remote control. Parameters: Frequency: 433.92 MHz rolling / fixed code. Number of channels: 2. Memory: up to 400 remote controls. Instructions for programming the receiver. How to program new remote controls: 1) Press the button "learn 1" or "learn 2" - the learning LED lights up. 2) Press the button on your remote control you want to learn. The LED starts to flash and goes off. This means that you have successfully learned your remote control to the receiver. Repeat the above steps for other transmitters. Clear receiver memory: Press "Learn 1" or "Learn 2" and hold the button until the Learn LED goes out. Once the learning LED is off, it means that you have successfully cleared the memory of the corresponding channel. HOW TO CONNECT YOUR RECEIVER: Connect 2 wires of CH1 or CH2 to your control board between: 1) COM and N/O, 2) COM and P/P (push button) parallel to the push button. All you need to do is connect this receiver to your control board by using only 4 wires (2 - for power; 2 - for relay. Note: The abriviations of your board may be different, so please refer to your manual. PROGRAMMING VIDEO: https://www.youtube.com/watch?v=NfpZvDAadWU&feature=youtu.be If you want to increase the range of the remote control reception to 150-200 meters, you can connect this antenna: https://www.amazon.de/dp/B0BWFH3TGT