Nice FLO1 / FLO2 / FLO4 Compatible Handheld Transmitter / 4-Channel Clone Remote Control 433.92 MHz Fixed Code Copier

• Affordable, high-quality Nice FLO1 / FLO2 / FLO4 433.92 MHz fixed code compatible clone remote control
• Distance: Extra long range of up to 100 metres
• Fast cloning process within 10 seconds
• Programming instructions, video link, battery and key ring are included
• Even better quality than the original Nice remote control

This is a high quality clone remote control that will clone your Nice FLO1 / FLO2 / FLO4 fixed code remote controls. With this remote control cloner, you can clone all 433.92 MHz fixed code key fobs. How to clone your remote control, we show you in these videos: https://www.youtube.com/watch?v=rfua7-VTJp4 or https://www.youtube.com/watch?v=-sDjb0XUl0Y Follow these simple steps to program your remote control; You need to erase the remote first: 1) Hold the lock and release button at the same time pressed pressed (LED LED blink) t 3 times) 2) Hold down the lock button, press the release button 3 times, the LED will now flash continuously. Now the remote is clear and ready to clone. Next, you need to clone your original remote: 1) Place both remote controls (ORIGINAL and CLONE) in the "back to back (II)" or "side by side" position. Make sure they have direct contact and touch, press a little to make them touch firmly. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Press and hold the button until the LED lights up: 2 flashes - 3 times - continuous light = successfully cloned only when the light is on permanently. If for any reason the clone flashes no further than 2, this means that the signal does not pass through, please slide the remote slowly up and down until you reach the point where it will go through. Note: You do not need access to your control board or receiver! If you want to increase the range of the remote control reception to 150-200 metres, you can connect this antenna: https://www.amazon.de/dp/B0BWFH3TGT If you need car sun visor clip holder for remote controls, you can buy it here: https://www.amazon.de/dp/B07FVW7F59