Martindale EZ664 Socket Tester Kit with Earth Loop Test

• Complete socket testing kit
• Leads for testing light fittings, fused spurs and terminals.
• Indication of 28 fault conditions
• Non trip earth loop impedance test
• Mains voltage check
• Supplied with soft carry case

The Martindale EZ664 gives total socket testing flexibility by being able to connect either to a standard 13 amp plug or via flying leads, ideal when testing at light fittings, fused spurs and terminals. The EZ664 uses two groups of LEDs to indicate wiring condition, mains voltage level and earth loop impedance. A group of three tricolour LEDs indicate the condition of the wiring at the socket under test or an out of tolerance supply voltage. Pass or fail and fault types are identified from the table conveniently located on the front of the tester. A key feature of the EZ664 is the ability to check the earth loop impedance of the wiring under test and indicate the measured value in six discrete ranges via three tricolour LEDs. The EZ664 measures the earth loop impedance with a 30mA or higher RCD in circuit without it tripping. The EZ664 detects and indicates if the mains voltage is below 195V or above 270V or if the neutral to earth voltage is greater than 30V. If the voltage is outside these limits loop impedance measurement will not be made.