Key PLAY4R / PLAY4F / SUB-44R / SUB-44WR / TXB-42R / TXB-44R / TXG-44R compatible hand transmitter, replacement remote control 433.92Mhz rolling code

• Good price, high quality rolling code key replacement remote control or additional remote control
• Replaces your original KEY PLAY4R, PLAY4F, SUB-44R, SUB-44WR, TXB-42R, TXB-44R ROLLING CODE remote controls
• The remote control connects to the key receiver just like the original KEY remote control
• Battery 12 V 27 A, key ring and programming instructions are included. Very simple programming procedure
• Distance: up to 100 meters, extra long range. Even better quality than the original key remote control. Latest technology

This is a high quality 433.92Mhz rolling code KEY compatible remote control replacement that replaces your KEY PLAY4R, PLAY4F, SUB-44R, SUB-44WR, TXB-42R, TXB-44R, TXG-44R remote controls. Note: Compatible with Key Rolling Code remote controls with a blue or amber LED. The replacement remote control is not compatible with a red LED fixed code remote. Parameters: Frequency: 433.92 MHz rolling number of channels: 4, battery and key fob included. How to program the remote control: This key replacement remote control must be programmed directly to your key receiver. It is compatible with KEY receivers such as RX4, RX4X, RXI-22, RXI23, RXI23X, RXM-22, RXM23, RCM23X, ... marked by a green LED. To program a new remote control, you must follow the instructions of the radio receiver. The standard programming procedure with the KEY receiver is as follows: 1) Press the P button on your receiver. The LED LR flashes slowly for 10 seconds, indicating that it is ready to program a new remote control. 2) Press the button you want to program on the new remote control within 7 seconds (press and hold the button for at least 2 seconds). The LED lights up for 2 seconds to indicate that the remote control has been successfully programmed. After the first storage, the LEDs flash for 6 seconds and wait for more new remote controls to be programmed. Otherwise, the receiver will exit programming mode. If you want to increase the range of the remote control reception to 150-200 metres, you can connect this antenna: https://www.amazon.de/dp/B0BWFH3TGT If you need car sun visor clip holder for remote controls, you can buy it here: https://www.amazon.de/dp/B07FVW7F59