Hutchinson 7PH Tumble Dryer Drive Belt, 1980mm, Chained Belt, 2 Years EU Spare Part Availability

• Transmission Belt is ribbed, 1980 milimètres development
• Its function to extend the movement of the engine to the drum of the tumble dryer
• Length: 1980 mm/teeth: 7/channels: 6/slots: Type H
• Please see attached instructions for placement

Transmission belt is ribbed, 1980 milimètres, with the function of the movement of the engine to the drum of the dryer. It is installed in the brand sèches-linge Electrolux, AEG, Balay, Bosch, corberó, Lynx, Siemens, Bauknecht, Whirlpool, Zanker, Zanussi, Blomberg, Ikea, Indesit, Ariston, Ignis, among many other brands. Length 1980 mm/teeth: 7/channels: 6/slots: Type H/Height: 2.5 mm/Width: 1.60 mm/Manufacturer: Hutchinson. Placement instructions Once you are inside the dryer: 1. Spend the belt in engine pulley 2. Place the hand strap, across the wire rod *, on the side of the drum (* The dryer can also have more than one strainer and may not have). 3. Slowly turn drum (strongly associated with the belt) and the belt will be put in place (it can be set up as a bicycle chain. (look at the photo)