ALIRANTA Hörmann RSC2-433 Compatible Hand Transmitter, Replacement Remote Control 4-Channel 433.92 MHz Rolling Code

• High quality replacement for the Hörmann RSC2-433 remote control. Built-in sliding protective lid that helps to avoid accidental operation
• Compatible with Hörmann ProLift / EcoStar LIFTRONIC 500, 700, 800 and Portronic D5000, S4000, Berner Limus One G50/G70 garage door opener
• Frequency: 433.92 MHz rolling code; battery: 12 V 27 A alkaline
• Includes battery, programming instructions and key fob
• Range up to 100 metres

Hörmann RSC2-433 replacement remote control that replaces your Hörmann RSC2-433 433.92MHz remote control: Compatible with the following garage door operator models: Hörmann ProLift / EcoStar LIFTRONIC 500, 700, 800 and Portronic D5000, S4000. Instructions for programming: 1. Press the learning button located on the side of the Hörmann EcoStar gate drive. The LED light on the motor flashes slowly. Release the button. 2. Press the desired button on your new remote within the next 10 seconds. 3. The LED light on the motor flashes faster. Release the button. 4. Press the same button on your new remote control again. Hold it down. 5. The LED light on the motor flashes very quickly. Release the button. Your new remote control is programmed. Please note: You can only program a limited number of remote controls with the Hörmann EcoStar door opener. How to erase all your remote controls: 1. Press the learning button located on the side of the Hörmann EcoStar door opener. Hold it down. 2. Wait 5 seconds and release the button. 3. The LED light on the receiver flashes slowly for 1 second, then faster for 4 seconds and then very fast for 2 seconds. All remote controls are deleted. If you want to increase the range of the remote control reception to 150-200 meters, you can connect this antenna: s://.amazon.de/dp/B0BWFH3TGT If you need car sun visor clip holder for remote controls, you can buy it here: s://.amazon.de/dp/B07FVW7F59