Honeywell 1032873 Miller H-Design Duraflex 2pts Harness with Automatic Buckles and 2 Webbing Loops - Size 3

• Other Straps : Standard black webbing 44 mm PES with PTFE treatment (water repellent / anti stain) Breaking strength :> 2700 daN
• Back Anchorage D-ring : Material : steel Finish : Zinc plated Silver Breaking strength : > 2300 daN
• Sternal point : D ring Material : steel Finish : Zinc plated Breaking strength : > 2 800
• Steel mating buckles : Finish : Zinc plated Silver Breaking strength :> 900 daN
• Certified for a maximum load of 140 kgs

The Miller H-Design harnesses are the new generation of harnesses dedicated to construction and general industry sectors providing more comfort, freedom of movements and safety to workers. Miller H-Design Duraflex 2 points harness with 2 webbing loops at the front and automatic buckles on chest and legs straps. Size 3. Shoulder Straps : Duraflex Stretch 44,5 mm webbing PES with PTFE treatment (water repellent / anti stain) Colour : green with a black drawing Breaking strength : > 2200 daN. Other Straps : Standard black webbing 44 mm PES with PTFE treatment (water repellent / anti stain) Breaking strength :> 2700 daN. Back Anchorage D-ring : Material : steel Finish : Zinc plated Silver Breaking strength : > 2300 daN. Sternal anchorage point : long webbing loops. Aluminium automatic buckles : Breaking strength : > 900 daN. Steel mating buckles : Finish : Zinc plated Silver Breaking strength :> 900 daN. Weight : 1,12 Kgs. Breaking strength:> 15 KN Temperature: -30°C to +50°C EN 361 Full Body Harnesses. Certified for a maximum load of 140 kgs. Life expectancy of our harnesses is 10 years from the date of manufacture. Some factors can contribute to reduce the performance or life expectancy of the product: Incorrect stocking; Incorrect use; Stopping a fall; Mechanical deformation or cut; Contact with chemical products (an acid or a base); Exposure to extreme heat sources > 60°C; Exposure to UV rays. Please remember that the product must be checked at least once a year by a qualified person. This inspection must be registered. Before each use, the product must be visually inspected by the user. The compulsory annual inspection will be the deciding factor as to whether your PPE should be put back into service or not.