GodHand PN-120-L Left-Handed One Blade Nipper - Made in Japan

• This thin blade single-blade nipper is specially designed for cutting plastic models, and is both sharp and durable
• Primary Country of Manufacture: Japan
• Specifications: Total length approx. 4.7 inches (120 mm), Weight approx. 2.2 oz (60 g), Single blade construction
• Compatible Materials: Only cutting plastic (PS resin, PP resin, ABS resin, PE resin)
• Cutting Capacity: Only compatible materials with Φ0.1 inch (3 mm) or less. However, transparent and translucent PS resin is hard, so it is limited to Φ0.08 inch (2 mm) or less

Product Description Cutting blade and cutting board blade are reversed Left hand blade one nipper, easy to handle with left hand. Blade One Nipper L is a standard model for single-edged nippers. This nipper is suitable for left-handed users, etc. Much thicker than the standard blade one nipper, the blade is slightly thicker than the Ultimate Nipper, giving the cutting surface a little pushed on the cutting board side, but the thickness of the blade makes it more durable. Single-blade construction that can be used as an ultimate nipper. Adjust the blade angle that lasts longer than the Ultimate Nipper. While the clear plastic cutting is the ultimate nippers up to 0.04 inch (1 mm), the blade one nipper supports 0.08 inch (2 mm). The cutting comfort is slightly heavier than the Ultimate Nipper, but the cutting surface is almost no difference when sliced. For left hand use even for left-handed people. Quality Notation Material: Special tool steel (made by Kobe steel); Total length: Approx. 4.7 inches (120 mm); Weight: Approx. 2.1 oz (60 g); Blade hardness: HRC58 or higher; Single blade specification. Blade breakage prevention stopper, overopening prevention pin, spring included, soft grip, original nipper cap included, left hand Cutting Capacity Compatible Materials: Only cutting plastic (PS resin, PP resin, ABS resin, PE resin). Cutting Capacity: Only compatible materials with Φ0.1 inch (3 mm) or less. However, transparent and translucent PS resin is hard, so it is limited to Φ0.08 inch (2 mm) or less. Precautions Regular blade one nipper and blade are reversed. Because this is a delicate nipper that emphasizes sharpness, the blade may chip or break if used incorrectly. Even with weak force, please do not squeeze with strong force than necessary. The blade thinner the more you go to the tip, and it is easy to break, so please cut it around the middle of the blade as much as possible. Do not twist the blade while cutting or removing the blade from the runner. Twist and break down the blade Do not cut objects that do not fit the length of the blade. One point in the middle of the blade is loaded and will break or bend Please do not use for cutting plastic that exceeds the cutting capacity or other materials that are not compatible with (metal, resin, paper, etc.) Please do not use for cutting plastic boards, cutting tags, cutting parts or cutting dowels. Remove any debris from the blade during or after use. Cutting with debris left behind on the blade will put more load and cause damage. In particular, when the shavings are pinched at the base of the blade, it is easy to rattle in moving parts. Do not touch the blade directly with your hand. The "cutting blade" is a sharp blade that may cause injuries. Sebum may cause rust. If you touch the metal part, wipe it clean and apply rust free oil. ・Moisture may also cause rust, so please apply oil frequently during the rainy season. If the lubrication performance of the moving parts is reduced, the shaft will wear out, which leads to reduced sharpness due to rattling Please lubricate the moving parts regularly. For safety purposes, please wear protective glasses. Cutting objects may fly. Make sure there is no person around you, no fragile items before working. Keep out of reach of small children. When not in use, please use the included nipper cap to keep in mind that it is safe. Safety Warning Please check the instruction manual before using