G1/2in Float Valve，Floating Ball Valve，Stainless Steel Float Valve Water Tanks Valve Automatic Water Control Valve Pools Float Valve，for Water Tank Sink Tower

• THREE HOLE INDUCTION: make up water and cut off water more timely. The bottom of this product is a three hole induction design, which greatly increases the contact base between the internal floating ball and the water surface, making it easy to lift water and reduce water. The floating of this product is designed as a solid floating ball, so there is no need to worry about water leakage or insufficient buoyancy, and it is more sensitive to water shortage and replenishment.
• SUPER LARGE DISPLACEMENT: Although this product is small and does not take up space, it is superior to the traditional process and can effectively increase the water output, which is more than the traditional ball valve. It is normal that the ball valve drops water when installing the product
• SCOPE OF APPLICATION: no need for electricity, environmental and water conservation. This product is applicable to water tank/water tower/pool/reservoir/solar water tank/water storage, etc. No electricity is needed, and clean water with pressure greater than 0.2 is connected to the bus to achieve water level control.
• APPLICABLE AMBIENT TEMPERATURE: the melting point of stainless steel shell of the ball valve is higher than that of other ball valves, and the high temperature resistance, corrosion resistance, waterproof and fireproof are widely used. It replaces the traditional float valve with stable performance and high reliability.
• HARD SHELL: the hard shell effectively increases the service life of the product. The collision in life is no longer a problem. Easy to use, long service life, low failure rate and water conservation.

Description Commodity parameters Name: Float valve Material: stainless steel Use position: water tank, water tank, water tower Thread size: G1/2“ Maximum installation inclination: 30 degrees; Working pressure range: ≤ 1.0MPa; The tap water pressure of residents is 0.3-0.5Mpa; It is necessary to ensure that the water level drop is greater than 80cm when using siphon for water supply, otherwise the water yield will be affected. Applicable medium temperature: ≤ 1-80 ℃; High temperature resistant medium temperature: - 20 ℃~100 ℃; If two valves are installed in the same pool, they should be kept at the same level Packing list Control valve * 1