Fasizi SOP8 SOIC8 Test Clip for EEPROM 25CXX / 24CXX + CH341 24 25 Series EEPROM Flash BIOS USB Programmer

• The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient.
• The main purpose of the CH341 Programmer is to back up, erase, program, calibrate and other actions on various software.
• The SOP8 clip support both wide body and narrow body SOP8 chip with 1.27MM Pitch.
• The CH341 Programmer support most 24 / 25 Series EEPROM BIOS SOP8 SOP16 chip on the market.
• Note: Due to the characteristics of the CH341 chip, the ESMT SST class 25 chip can only be read and cannot be written.

Features: Nowadays, many motherboards, routers, set-top boxes, LCD screens, game consoles and other EEPROM chips are SOP8. Traditional solution for burning chip needs: First disassemble the chip, then re-weld it back after burning. The operation is very troublesome and very easy to damage the chip. This SOP8 clip is a great solution for burning the chip without disassembling the chip, saving soldering time and making flash BIOS simpler and more efficient. Tips: Some chips are affected by peripheral circuits and cannot be clipped directly. Please check the chip location on the motherboard before purchasing. Note for Test Clip: 1. Some motherboards can directly clip the chip, but some chips are affected by peripheral circuits and cannot be operated like this. Check the chip location on the motherboard before purchasing! 2. The test clip can basically be used with many high-power programmers. When a programmer with a protected function is encountered, the clip cannot be read at normal voltage. You need to add a 3.3V voltage. How to use: Hold the chip first, and add a 3.3V voltage to the pin corresponding to the 8th pin of the chip. Generally, the 3.3V power supply has two wires, the VCC is connected to the clip, and the other wire is grounded. 3. Do not forcibly press down when clamping, first open the clip and clip it from the left and right sides of the chip. When disassembling, please don’t pull it out directly. First separate the clips left and right, then take them out so that they won't break the tip of the clip. Package contains: 1 x CH341 USB Programmer 1 x SOP8 SOIC8 Test Clip 1 x 8Pin to 8Pin Converter 2 x SOP8 SOP16 to 8Pin Converter 2 x 2.54mm 4Pin header