Fasizi PICKIT2 Programmer + PIC ICD2 PICKit 2 Programming Adapter Universal Programmer seat

• Support the IC is less than KIT3/ICD2, stability is better than ICD2, also off-line batch programming. Support for PICKIT2 IC, can be viewed MPLAB IDE V8.56 software.
• PICKIT2 online programming and debugging Microchip's PIC10/12/16/18/24/32, dsPIC30/dsPIC33 almost the entire line of PIC FLASH microcontroller chip.
• PICKIT2 to programming the Microchip the KEELOQ of HCS series of chips, MCP250xx CAN chips EEPROM memory chip.
• Open the software, configure,select device PICKIT2 support in front of the green light.
• The simulation programmer with a protective function on the basis of the original increase of self-recovery fuse with three lights so you can clearly understand the current state of the programmer many similar products online.

The PICkit2 support device models table: Devices, the PIC10F the Series: The PIC10F200, PIC10F202, the PIC10F204, PIC10F206, the PIC10F220, PIC10F222 Devices, PIC12F the Series: PIC12F508, PIC12F509, PIC12F510, PIC12F519, PIC12F609, PIC12HV609, PIC12F615, PIC12FHV615 PIC12F629, the PIC12F635, on PIC12F675 and the PIC12F683's Universal Programmer Seat Description: Instructions for use: Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position. The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions) The seat supports the following programming microcontroller: PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN Series devices (except 16F57) PIC16/18XX 18PIN Series devices The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Package Included: 1 x PICKIT2 Simulator 1 x USB cable 1 x 6pin cable 1 x Universal Programmer Seat