ENGINEER DWZ-302 Hex Socket Screw Extractor 4 Bit Set for The Quick & Easy Removal of Hex Screws with Damaged Heads (fits onto a 3/8" Socket Wrench Drive)

• the sharp and fine-pitch spiral tip 'grips' all 6 sides of a hex socket firmly ...without slippage!
• no need to strike with a hammer - just press the extractor bit firmly into the ruined hex screw head & twist it out
• other screw head types such as Phillips, Torx, square socket can be extracted *if* an electric drill is used to drill a pilot hole in the screw head first (please refer to the guide in the photo gallery)
• Socket Wrench driver size compatibility : 3/8" drive (please check your socket driver square connector size first - it should measure 9.5mm)
• constructed from high carbon steel

ENGINEER DWZ-302 Hex Socket Screw Extractor 4 Bit set for the quick & easy removal of Hex screws with damaged heads (fits onto a 3/8" Socket wrench drive) The ENGINEER DWZ-302 is Screw Extractor bit set (4pcs) that fit onto your own 3/8" drive (9.5mm square) socket wrench - these extractor bits specifically designed for the quick & easy removal of screws with Hexagon socket (Allen Key) type heads - please refer to photo gallery for the actual screw sizes that can be extracted with the DWZ-302. (individual bit sizes also available in the ENGINEER DWZ range - search Amazon for ENGINEER DWZ-05, ENGINEER DWZ-06, ENGINEER DWZ-08 and DWZ-10)