2 Channel 192kHz DAC Converter, Toslink to Analog Stereo Audio R/L Converter Adapter with 4.0 OD cable, Analog Digital Audio Converter for HD TV DVD Blu-ray Player Amp Speaker Soundbar

• The DAC converter converts coaxial or digital audio signals for Toslink to analog left/right audio, and can be connected to external devices through standard connector types, such as amplifiers. Or connect to the 3.5mm h headphone port output
• The DAC converter converts coaxial or digital audio signals for Toslink to analog left/right audio, and can be connected to external devices through standard connector types, such as amplifiers. Or connect to the 3.5mm h headphone port output
• It not only supports digital to analog converters, but also supports coax for Toslink and Coax for Toslink.
• It comes with a 4.0 OD cable, coaxial cable and power adapter, no need to install other programs, just plug it in and go.
• With the maximum sample rate of 192KHz, by using the volume knob, you can adjust the volume of the L/3.5mm audio jack output for R + use.
• The built-in hifi amplifier chip, left/right output and 3.5mm can drive headphones/sound impedance is 16 ~ 150ohm.

Specification: Condition: 100% brand new Item Type: Converter Material: ABS Color: As pictures show Approximate weight. 239g [Bidirectional switch] Please note that the converter supports digital to analog conversion, but does not support analog to digital conversion. [Support volume adjustment] Built-in hifi amplifier chip, left/right output and 3.5mm can drive headphones/sound impedance is 16 ~ 150ohm. Compatible volume control, and the volume control knob is only used to adjust the amount of headphone and RCA connector, non-coax or fiber cable for Toslink. [Plug and Play] Comes with OD 4.0 cable, coaxial cable and power adapter, no need to install other programs, just plug and play (Note: this converter doesn't support 5.1 channels (like Dolby and DTS); please set it to use previously output audio to PCM or LPCM; for Pro and Slim this converter can't be used.) [192KHz maximum sampling rate] Using the volume knob, you can adjust the volume of the RCA L/3.5mm audio output for R + use (Note: can't control Toslink or coaxial audio output). It actually supports 32, 44.1, 48, 96, and 192 KHz sampling rates, as well as incoming 24-bit S/PDIF bitstream on the left and right channels. Package list: 1 x converter 1 x USB cable 1 x manual Note: 1. There is a power switch on the volume knob. Before using the DAC, turn on the power switch. 2. Set the audio output to PCM/LPCM format. 3 For TVs, even if the audio output is set to PCM/LPCM format, there is no sound, please turn on the external TV speakers (menu-sound speaker-Heb setup/external speakers on), this converter 4. Dolby o DTS 5.1 channels are not supported