DieseRC 2 Channels Wireless Relay Remote Control Switch 433Mhz RF DC 6V 12V 24V 30V 10A Relay Receiver with 2 Transmitters Keyfob, Big Terminal Easy Wiring

• 【Excellent Design】433Mhz RF wireless remote control switch.Stable and reliable performance with high reception sensitivity (> - 105dBm). Strong signal can pass walls, floors, doors.It can be controlled within 50 meters distance with no obstacle.You can remotely operate every machine connect with the relay receiver through the remote control.
• 【Easy to use】Extremely easy to set up and reset. There are 3 operating mode(momentary/toggle/latched mode) can be chose.You can easily set up by yourself depends on your needs. The operating mode of the product is adjustable.These product are tested before shipping, and programed in toggle mode.
• 【More Flexibility】 This receiver contain 2 10A relays, and there are 3 terminals(normally open, common, normally closed) for each relay.This 2 relays are independent, so that you can remote control each of them independently. This is a potential-free contacts relay. Passive output. Dry contacts. Each receiver can store about 20 transmitters. And One transmitter can control multiple receivers too.
• 【Quality Assurance】High-quality relay that can be used over 100,000 times.Let this product is more long-lasting and stable to use.The blue high-power terminal can withstand a current of 10A, so that this product can have a good effect even when the current is unstable. The receiver is suitable for DC 6V~30V voltage, it is more flexible to use. fitable for 6V 12V 24V 30V.
• 【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can remotely operate every device connect with the relay receiver through the remote control. such as, garage door, electric door, shutter door, expansion door and electric curtain, Motor, Lamp, lighting, ventilation device, Signal transmission and so on.

Package include: 1x Relay Receiver board 2x Transmitters (contain battery) 1x Product manual Parameter: -Receiver Working voltage: DC 6V~30V -Input/Output voltage: 1~250V -Quiescent Current: <5MA -Max current: 10A -RF frequency: 433MHz -Working temperature: -30~+80 -Receiving Sensitivity: >97dbm -Amount of storage remote controls: 20 pieces -Support encoding: 1527 Learning code -RF Operating mode: ASK superheterodyne wireless reception -Receiving range: Open space is more than 50 meters -Pin: COM,NO,NC - Operating mode: Momentary /Toggle/ Latched Mode -Battery: 1x 27A 12V(included) Usage(Operation Mode): Momentary Mode: 1. Press and hold one button, the relay will turn on; 2. Release the button, this relay will turn off. Toggle Mode: 1. Press “A” key, relay “1” will turn on; 2. Press “A”key again, this relay “1” will turn off. Latched mode: 1. Press “A” key, relay “1” will turn on; 2. Press “B” key, relay “2” will turn on, at the same time relay “1” will turn off. Reset: Press the learning button (on the Receiver) 8 times. succeed. Note: After reset, all the remote controls cannot work anymore. Setup 1. Press the learning button (1 time for Momentary mode, 2 times for Toggle mode, 3 times for Latched mode). Wait for 3 seconds; 2. Press “A” key. Wait for 3 seconds. 3. Press “B” key. Succeed. Note: All the product are set up in toggle mode before shipping. If you want to change the operation mode please reset firstly.