Carrera 20020593 Inside shoulder curve 4/15° (12), end piece (2) Slot Car Track Accessory

• Add-on parts inside edge strips on a scale of 1:24
• DIGITAL 124, DIGITAL 132, evolution
• To beautify your racetrack

Product Description Inner stripes complete your race track. It's not hard to see the obvious advantage of outer curbs on 1:24 race tracks. They are designed to ensure that large 1:24 scale track cars do not skid off the track when drifting through curves. These inner edge strips will quickly become indispensable for all those who value the visual of their circuit. The latter complete the circuit in terms of appearance but also functionally because circuit cars tend to go off the rails when they take a corner too quickly. A really unpleasant driving feeling. The set contains a total of 12 inner edge strips also called Curbs for the 4/15° curve. Two end pieces are also included that will be installed on the next straight. They are on a scale of 1:24 and can therefore be used for circuits at the same scale. Directions 1. Remove the inner edge strips and end pieces from their packaging. 2. Locate the 4/15° curves on your existing 1:24 scale slot car track. 3. Install one inner edge strip on the inside of each curve, ensuring they are securely in place. 4. Install the two end pieces on the next straight section of your track, one at each end. 5. Ensure the strips and end pieces are properly aligned with the track to prevent cars from skidding off. 6. Your track is now beautified and safer for racing. Safety Warning not_applicable Box Contains Toys.