Carrera 20020567 Outer Edge Strips for Curve 1/30 ° (6), end Pieces (2) Slot Car Track Accessory

• Outer edge strips for curve 1/30 ° (6), end pieces (2)
• For decorating and expanding the track
• Outer Edge Strips for Curve 1/30 ° (6), end Pieces (2)

Product Description Breathtaking slip-ups now You can now complete your Carrera race track on a scale of 1:24 with outer edge strips. These borders are always a little extra visually. They are especially useful if you want to run 1:24 scale track cars on your Carrera DIGITAL 124 racetrack. No problem on the straights, but for skidding in the corners it was more complicated until now because the cars tended to slide off the track. Thanks to the outer edge strips, this will no longer be the case. The set includes six 30° curve fasteners each with two end pieces. By putting everything together, you'll have an outer border strip for a 180° curve. The edge strips are suitable for the Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION tracks on a scale of 1:24. Directions 1. Unpack the six 30° curve fasteners and two end pieces. 2. Connect the curve fasteners to form a 180° curve. 3. Attach the end pieces to complete the outer border strip. Safety Warning not_applicable