Car Passenger Seat Mat Occupation Sensor Bypass Emulator Replacement Seat Occupancy Mat Sensor Emulator A Class W176 Up to 2015 EU

• Purpose: Solve the problem of the passenger seat sensor failure, cover the defective passenger occupancy pad sensor and fix the air cushion warning light issue caused by the problem.
• Applicable Models: The passenger seat mat occupancy sensor emulator is especially designed replacement A Class W176 up to 2015 EU with high accuracy to meet your demands.
• High Driving Safety: In the event of a traffic accident, the passenger air cushion will be deployed directly with the emulator, regardless of whether there are passengers in the seat to improve driving safety greatly.
• How to Work: When the passenger seat sensor emulator is normally connected to your car, the signal that the passenger is in the passenger seat will be sent even when the passenger seat is not there.
• LED Indicator Light: The seat occupation mat sensor emulator is engineered with LED lights of different colors to display the installation and working status, which greatly improves the time efficiency.

Specification: Item Type: Seat Occupancy Mat Sensor Emulator Material: ABS Fitment: Replacement for BENZ A Class W176 up to 2015 EU How to Use: 1. Switch off the ignition.2. Locate the seat mat connector under the passenger seat. You need to look for it from the back seat. The seat belt connector is marked as 1. The seat mat connector is marked as 2.3. Disconnect the seat mat plug and replace it with the emulator plug.4. Connect the seat belt emulator, if necessary.5. Switch on the ignition. The LED light on the emulator should start flashing in 2 different colors, which means the device is powered (12V) and connected to the air cushion control unit successfully. No light is no power (there is a problem with car's electric installation). LED light blinking in 1 color is the emulator is powered but has problems connecting to the Air Cushion Control Unit (usually this indicates problem with the ACU, contact us).6. Connect the diagnostic scanner again and reset old fault codes. Check if the defective seat mat error disappeared.7. If the fault code appeared again or the SRS light is still on then please follow our detailed installation instruction. packing list: 1 x Seat Occupancy Mat Sensor Emulator 1 x Manual