ANBWEHR Garage Door Remote Control Compatible with Hörmann bs HSM4 HSE2 HS1 HS4 HSZ1 HSZ2, Handheld Transmitter, 868.3 BS MHz, 4 Channels, Rolling Code Technology, Controls Up to 4 Garage Doors

• This remote control is not the original remote control, replacement garage door opener. Special note: If your original remote control is not listed, please do not buy it.
• Compatibility Our replacement garage door opener is compatible with handheld transmitter HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, HSD2-868-BS, HSS4-868-BS.
• Two programming methods: copy the code from the original remote control, programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), it will not work.
• Garagento remote control frequency: 868 MHz, LED blue light, 4 channels. Not compatible with remote controls on other frequencies, even if they have the same appearance.
• Supports 4 garage doors, control of up to 4 garage door openers or gates + rolling code technology to protect the access and connection of your home. Unique design and durability and well-made materials such as metal reinforced key ring frame, more solid and beautiful than a bulky 100% plastic remote control.

" Note: Built-in scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), it will not work. 868MHz Garage Door Opener, Replacement Garage Door Opener Compatible with Handheld Transmitter HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS Remote Control Compatible models: HS1-868-BS. HS4-868-BS. HS5-868-BS. HSE1-868-BS. HSE2-868-BS. HSE4-868-BS. HSP4-868-BS. HSD2-868-BS. For HSS4-868-BS Note: Built-in scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), it will not work. How to program? 1) Press and hold the button of the new remote control, you want to save the code of the original remote control, press and hold it, press another button three times until the red LED light lights up for 10 seconds, and release all buttons. 2) Place the original remote control as close as possible on the left side of the new remote control. 3) Press the button of the original remote control. You need to copy the code until the LED flashes red and blue alternately. Check if the LED of the new remote control flashes blue. If not, try to get as close to the original remote control as possible. 4) When the blue light of the new remote control flashes quickly, the learning process is complete. Release all buttons. 5) Please do the same procedure for the remaining buttons. Reset method: Each button on the remote control is assigned to a new radio code using the following steps. (1) Remove the battery for 10 seconds. (2) Press and hold one button of the remote control. (3) Insert the battery. The LED flashes slowly blue for 4 seconds. The LED flashes quickly blue for 2 seconds. The LED lights up blue for a long ( 4) When you release the button of the remote control, all radio codes are reassigned. D Note: If the remote control button is released prematurely, no new radio codes will be assigned.