Ambersil 30239 High Temperature Anti-Seize Lubricant 500G

• COPPER PASTE is a high temperature anti-seize lubricant
• A soft - copper-coloured paste based on micronised copper powder and synergistic anti-oxidant - anti-corrosion and anti-wear additives suspended in a premium grade stable oil
• It is an effective anti-seize formulation preventing:Metal-to-metal contactSeizingGalling and Fretting corrosionFeaturesReduces friction and wear - even when the base oil has already evaporatedHigh pressure and high temperature resistanceEnsures
• Wire brush scaled parts and clean with an oil-free solvent like Amberklene FE10A thin even film should be applied either by spraying or by brushing Assembled parts (gear teeth - screws

COPPER PASTE is a high temperature anti-seize lubricant. A soft - copper-coloured paste based on micronised copper powder and synergistic anti-oxidant - anti-corrosion and anti-wear additives suspended in a premium grade stable oil. It is an effective anti-seize formulation preventing:Metal-to-metal contactSeizingGalling and Fretting corrosionFeaturesReduces friction and wear - even when the base oil has already evaporatedHigh pressure and high temperature resistanceEnsures accurate assemblyEnables easy disassembly of:Threaded partsgaskets and flanges - even after long operational periodsThreaded parts remain in good condition and can be re-usedSeparating film ensures favourable release behaviour of the threaded connectionsExcellent sealing even in corrosive atmospheresResistant to hot and cold waterLead-free and nickel-freeAerosol formulation does not contain chlorinated solvents and uses hydrocarbon propellantDoes not migrate - even when heated to 370°CApplicationsAn effective anti-seize lubricant for:Bolts - nuts - pinsScrew connections on hydraulic equipmentGuides for brakesBushings - fittingsBrake adjustersSpark plugsSplinesWheel boltsFlanges - flange sealsPipeline connectionsExhaust screw connectionsLinkagesSliding sleevesshaftsPress fitsTo absorb disk brake noiseDirectionsThe surfaces to be treated should be clean - dry and grease-free. Wire brush scaled parts and clean with an oil-free solvent like Amberklene FE10A thin even film should be applied either by spraying or by brushing Assembled parts (gear teeth - screws...) can slowly be put in motion. Avoid mixing with other products. Test before use on plastics or rubber. Do not use on energised equipment - oxygen systems or in presence of acetylene. Use aerosol only in ventilated areas.TYPICAL PRODUCT DATA (without propellant)Appearance : Homogeneous - copper colouredFlash point (open cup) : <0CBoiling range (solvent) : 60-95CVapour density (vs. air=1) : 3Specific gravity @ 20C : 0.81Specific gravity