Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

• This pen comes with native USB and 4MB Flash + 2MB PSRAM, making it perfect for use with CircuitPython or Arduino with low-cost WiFi
• ESP32-S2 240 MHz Tensilica processor – the next generation of ESP32, now with native USB so it can act as a keyboard/mouse, MIDI device, hard disk drive, etc.
• The ESP32-S2 is a highly integrated, low-power 2.4 GHz Wi-Fi system-on-chip (SoC) solution that now features integrated native USB as well as some other interesting new technologies such as time-of-flight measurements.
• The color TFT is connected to the SPI pins and uses additional pins for control that are not exposed to the breakout pads.

This is an ESP32-S2 Feather board with a built-in IPS TFT color display. It has all the features of a Feather mainboard, the cozy warmth of an ESP32-S2 WiFi microcontroller, and a 240x135 pixel color TFT display. All that and it even plugs nicely into a breadboard, terminal block wing, or Feather Doubler, or even just stacks on top of another wing. ESP32-S2 240MHz Tensilica Processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, hard disk drive, etc. Mini Module - FCC/CE certified and comes with 4MByte Flash and 2MByte PSRAM - you can have huge data buffers. 1.1 IPS TFT with 240 x 135 pixels color – bright and colorful display with ST7789 chipset that can be viewed at any angle. Power options: USB Type-C or Lipoly battery. Integrated battery charging – when powered by USB-C LiPoly Battery Monitor – LC709203 chip actively monitors your battery for voltage and charge level/percent reporting via I2C Reset and DFU (BOOT0) buttons – to get into the ROM bootloader (which is a USB serial port, so you don’t need a separate cable ) Serial debug output pin – (optional, for checking the hardware serial debug console). STEMMA QT Connector for I2C devices – with switchable power, so you can go into low power mode. On/Charge/User LEDs + Status NeoPixel – with pin controlled power for low power consumption. Low power consumption. In deep sleep mode, we can reduce to 80~100uA current consumption from the Lipoly connection.