WK Electrical - 3 gang socket Converter Socket 1G/2G To 3-Gang 13A with USB A+C (40W PD3.0)

• Convert BOTH 1Gang or 2Gang Socket to a 3 Gang Switched Socket with USB x 4 (Total 40W PD3.0 with PPS function)
• Surged Protection - Typical energy absorbsion 190 Joule MOV between L & N pole
•  13A Fused - If there is any problem in the circuit, simply replace the 13A Fuse.
• Can be fitted in 25mm BS back box (No Matter Single or Double!!)
• Quick Charge: WK Power Delivery (PD) allows devices to charge fast over a USB connection. It provides HIGH-SPEED charging with variable voltage using Intelligent Device Negotiation.
• Type C + Type A USB output: This 40W USB Type C socket supports 5V 3A, 9V 2.22A, 12V 1.67A, while the Type A port supports 5V 3A, 9V 2.22A, 12V 1.67A
• PD3.0 with PPS function: This smart charge wall socket support QC2.0, QC3.0, PD2.0 and PD 3.0 protocol. Also allows for renegotiation of non-standard currents and voltages between charger and devices.
• Better Battery’s Lifespan: Programmable power supply (PPS) allows for stepwise changes in current and voltage. Decreasing the conversion loss, ensuring the charge is more efficient. PPS function also produced less heat, which increase a battery’s lifespan.
• Compatibility: This Fast charge USB C socket which fits into a 1 Gang or 2 Gang 25mm back box, supports ALL smart phones / tablets / smart watches series. Ensuring a Quick and Safe charging to your valuable devices.

Product Description Conversion Socket Model 8533C40 3 Gang switched Conversion Socket with 4 USB charge ports and surge protection, 13A fused Product Specification Principal material - Thermoplastic housing, brass / bronze contact and bussbars Input: 250Vac 50 Hz supply , max load 13A Dimension : 258mm x 88mm x 26mm Surge device Typical energy absorbsion 190 Joule MOV between L & N pole USB ports (combined output) Typical 20W x 2 with PD3.0 and PPS function with self- setting overheat protection Conformance to BS or EN No (s) and or approval/s LVD : BS 1363-2:2023 EMC directive: EN55022, EN55032, EN55024, EN61000 Intended Application Converts existing single or twin wall plate socket to a 3G or 4G socket Can be fitted in 25mm BS back box Installation should be carried out by a qualified electrician Switch off mains supply during installation and do not over load Do not operate in damp or humid environment Do not operate close to heater or high temperature heat source Replacement fuse should be BS1362 approved For Indoor use only