VOLOHAS 10 x 2.5 solid tyres for Ninebot MAX G30D II electric scooter 60/70-6.5 solid tyres for Max G30/g30 d/G30LP/G30LE/G30LE II/G30e 10 inch solid rubber tyres for ninebot max g30d 2 accessories

• 【PROFESSIONAL DESIGN】Highly elastic electric scooter tyre, specifically for ninebot max g30d 2 electric scooter. Also applies to Ninebot Max G30/max g30 d/Max G30LP/Max G30LE/Max G30LE Ⅱ/ Max G30e/ G30e ii replacement wheels front or rear. The inner cross-sectional width of the tyre is 45 mm. If your original tire cross-section width is between 1.7 and 1.8 inches, then our tire fits, otherwise not.
• 【FLAT-PROOF SOLID RUBBER TYRE】This solid rubber tyre is non-inflatable and maintenance-free, it is explosion-proof, durable, long-lasting and you do not have to worry about getting a flat. The excellent cushioning ability makes the tyre stronger than conventional pneumatic tyres.
• 【EXCELLENT GRIP】The deep anti-slip texture design offers superior grip on dry and wet surfaces. Single tread pattern, low resistance, improves drainage. The center breaks the water tank, the pressure is even and the water breaking effect is increased. Diamond pattern on the shoulders to prevent lateral slipping.
• 【EXCELLENT SHOCK PROOFING】The special honeycomb design of the scooter tyre gives it excellent shock absorption, impact resistance, and pressure resistance. A solid natural rubber wheel maintains rolling flexibility. It can be used in snow and rain. And offers you the highest level of safety.
• Installation instructions: How to install solid rubber tyres more easily? 1. Heat-softening tyres. 2. Add soapy water or Vaseline. 3. Install with tire lever. (Each tyre comes with a crowbar.) Tip: installation requires experience, skill, strength. Installing solid tyres can be a little difficult for first-time fitters. You can refer to our installation video tutorial and the installation step instructions on the page details!

Installation instructions: Step 1 Heat-softening tyres Before installation, you need to put the solid tyre in boiling water for about 10-15 minutes to soften it. Then the tyre becomes more flexible and malleable, which makes bending and mounting easier. Please note: This is the key to easy installation, and of course you can also use a microwave for this purpose. Step 2: Add soapy water or Vaseline Cover the rim and the inside of the tyre with soapy water or petroleum jelly. This allows the solid tire to glide more easily in the rim. Attention: Please avoid using petrol or lubricating oil, otherwise the tyre will be damaged. It is also dangerous to use greasy or oily material. In case of emergency braking, the tyre can slip and rotate on the wheel. Step 3: Confirm Direction Check the direction of rotation of the tyre before installing it. The lines of the tyre must face the front of the scooter. This is important because the treads of the tire are designed to properly channel water away when you drive on wet surfaces. Friendly tips: If you mount it in reverse, you lose grip and increase the risk of slipping. Step 4: Install with tyre lever Place the tyre on the floor and the rim over the tyre. Place both sides of the rim on the inside of the tyre. Then place two feet on the rim so that it does not move. Push the tyre lever between the rim and the tyre until the smooth tyre slides up, and move to the appropriate position on the rim. Note: Doing this alone is not always easy, so you may want to ask someone for help.