EPEVER MPPT Solar Charge Controller 50A Negative Ground 150V PV Solar Panel Charger with MT50 Remote Meter Temperature Sensor

• Negative Ground 150V PV Input, Compatible with 12/24/36/48V Batteries (Lead Acid) Charging. Only Solar Panel and Battery Connector Available
• Dual RS485 Port (RJ45 Connector), it can be paralleled up to 8 units together linked by 8pin ethernet cable to make the data monitoring easy and accurate.
• 50ampere Charging Current Max with big heat sink, Max. PV input power: 625W/12V battery, 1250W/24V battery , 1875W/36V battery, 2500W/48V battery system
• Support 4 charging options: Sealed, Gel, Flooded and User define, Battery temperature compensation will make the charging progress efficiently.
• Standard Modbus communication protocol with RS485 interface , to monitor or set the parameters by using the phone Apps, MT50 Meter and PC software

Tracer 5415AN MPPT Charge Controller 50 amp Rated charge current: 50 amp Max Input Power: 625W-2500W ( 625W/12V battery 1250W/ 24V battery 1875W/ 36V battery 2500W/ 48V battery) Max.PV open circuit voltage: 150VDC (138V at 25℃ temperature) Battery type selection: lead-acid ( Gel, Sealed ) Flooded batteries and User Common-Negatived Ground Controller User programmable for battery types, load control etc. Recommended cable: 6AWG/16mm2 MT50 Remote Meter: Compatible with EPever Tracer-A/AN/BN, LS-B/BP, VS-BN series controllers With attached extension cable, it will showing the operational data and working status of connected MPPT charge controller. RS485-150U Cable(1.5m): used to monitor each controller on the network using Solar Station PC software and update the firmware. Remote Temperature Sensor（TS-R，3m）： Obtain battery temperature for temperature compensation of control parameters Package List: 1 X Tracer 5415AN Solar Charge Controller 1 X MT50 remote meter 1 X RS485-150U communication cable 1 X Battery voltage Sensor Terminal 2 X Use Manual