5 channels constant voltage Dmx512 decoder RDM decoder led dimmer DMX DC 12-48V

• 1st Compatible with the DMX512 standard protocols.
• 2nd Digital numeric display, set DMX decode start address with buttons.
• 3rd The RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder can be set by DMX master console.
• 4th Logarithmic or linear dimming curve selected.
• 5. Protection against overheating, overload and short circuit, recover automatically.

Features: 1st Compatible with the DMX512 standard protocols. 2nd Digital numeric display, set DMX decode start address with buttons. 3rd The RDM function can realize intercommunication between DMX master and decoder. For DMX decoder address can be set for example by DMX master console. 4th 16 bit (65536 levels)/8 bit (256 levels), gray level selected. 5. PWM frequency 250/500/1000/2000/4000/8000/16000/32000Hz selectable. 6th Logarithmic or linear dimming curve selected. 7th Protection against overheating, overload and short circuit, recover automatically. 8th D5-P has green terminal DMX signal ports. Technical data: Input and Output: Input voltage: 12-48 VDC. Input current: 20.5 A. Output voltage 5 x 12-48) VDC Output Current 5CH,4A/CH Output power 5 x (48-192) W Output type Canstant Voltage Reverse polarity protection, over-heat, over-load, short circuit Please note: 1st A DMX signal amplifier is needed if more than 32 decoders are connected, or use a long signal line, signal amplification should not be more than 5 times continuous. 2nd If the recoil effect occurs due to a longer signal line or bad line quality, try to connect 0.25W 90-120Ω terminal resistor at the end of each DMX signal line. 3rd When OLA display overloaded alarm. When display OHA, overheat alarm.