3Pcs Gate Remote Control Fob Universal Garage Door Opener Remotes 433.92MHz Electric Gate Fob with Key Cover Slide 4 Button Fixed Code Duplicator

• For detailed instructions and precautions, please see the description!
• 433.92MHz Fixed Code Cloning - Specifically designed for fixed code systems (2260/2262/1527/PT2264/5326/SC5262/HT600 more chips), this remote clones existing remotes for garage doors, electric gates, and roller shutters. Not compatible with rolling code systems—verify your original remote’s frequency and chip before purchase.
• 4-Button Multi-Device Control - Each remote features 4 independent buttons to clone up to 4 different devices. Reset and reprogram freely for garage doors, gates, alarms, or home appliances—no limits on coding attempts.
• Notice before purchase - There are three conditions should be confirmed before purchased. ①The original remote control works normally.②The frequency should been 433.92Mhz. ③The chip Code(Encoder Chip) as listed. ④ ***Note: Rolling code remotes will not work!!! This only can copy fixed code.
• Wide Compatibility with Common Chips - Supports chips like 2260,2262(such as PT2262, SC2262, HS2262, LX2262, HX2262, etc.),1527(EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527)PT2264, PT2240(LX2240, LX2241, SCL2240), CS5211 and more. Check your original remote’s frequency (433.92MHz) and chip model to ensure compatibility before ordering.Although different chip manufacture has different chip model prefix, it will be OK, as long as the chip model numbers are same.

Replicable Chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (partial code), HCS300\HCS301 (partial code), some single-chip microcomputers.......... Dooya tubular motor controller remote control handle, other 32-bit codes, etc.; Most remote controllers encoded with single-chip microcomputers have a maximum code of 64 bits. Clearing Method: Press and hold the "A" and "B" keys at the same time, the LED indicator flashes three times, release the "B" key, do not release the "A" key, click the released "B" key three times, the LED indicator enters a fast flashing state, and all the data in the memory is cleared. After clearing the data, no matter which button is pressed on the remote control, the LED indicator will not light up. Copy Method: Hold the original remote control in one hand and the copy remote control in the other, and keep the two remote controls as close as possible (ideally, place the two remote controls side by side on the desktop at zero distance). Press the buttons for the desired copying, and the LED indicator will flash quickly three times and then quickly, indicating that the copying is successful. The other buttons can be operated in the same way. Some remote controls have low transmission power, so the original remote control and the copy remote control should be operated back to back for copying. Some operating environments are subject to interference, so avoid interference. If the copying does not work well, clear the code and copy again. (Especially important: the remote control in your hand must be able to work properly and have the same frequency as our remote control)