30A Brushless ESC, Brushless ESC XT60 Plug Eletronic Speed ​​Controller Electronic Speed ​​Controller for RC Remote Control Drone Helicopter FPV

• 【High Quality Electronic Components】Brushless ESC is made of high quality electronic components, in use, easy to install without complicated operations, and can be used as RC remote control drones, helicopters and other practical accessories
• 【Independent Heatsink】With a continuous current of 30A and a peak current of 40A, the output MOSFET power tube is equipped with an independent heatsink to reduce the temperature rise of the device and improve the high-current operability of the system
• 【Noise Reduction】The power input port uses an ultra-low impedance, large capacity electrolytic capacitor, which improves anti-interference ability, thereby effectively improving the performance of the product
• 【Built-in Switch】With BEC built-in switching mode, it is very light and efficient. It can operate without a separate receiver battery to power the servo and receiver, reducing weight and complexity
• 【Voltage Regulator Chips】The single-chip microcomputer uses an independent voltage regulator chip, which avoids the performance disturbances caused by the BEC load change, improves work stability, and extends the product usage time

Product description 1. The power input port adopts an ultra-low impedance, high-capacity electrolytic capacitor, improving anti-interference ability. 2. The single-chip microcomputer uses an independent voltage regulator chip, which avoids the current interference caused by the BEC load change and improves working stability. 3. The output MOSFET power tube is equipped with an independent heatsink to reduce the temperature rise of the device and improve the system's high-current workability. 4. Made of high quality electronic components, in use. With 30A continuous current and 40A peak current. 5. Practical accessories for remote control RC drone, helicopter and FPV etc. Easy to install, no complicated operations required. Specification: Item Type: Brushless ESC Material: Electronic Components />Colour: black Continuous current: 30A Peak current: 40A Plug: XT60 BEC: yes BEC output: 1.5A / 5V / >Applicable Battery: 2-3S Application: RC Remote Control Drone, Helicopter, FPV etc. Package List: 1 x ESC Directions 1. Remove the ESC from its packaging. 2. Connect the ESC to the motor using the XT60 plug. 3. Connect the power wires to the battery. 4. Connect the signal wire to the receiver. 5. Power on the ESC and test the motor. 6. Adjust the throttle to control the motor speed.